Skip to main content

RD-1AE Details

Corellium Atlas provides 2 board model(s) in the RD-1AE family.

RD-1AE with Hypervisor Support​

Board Image

  • RD-1AE with Hypervisor Support is generally available.
  • Supports connecting with the GNU Project Debugger.

RD-1AE with Hypervisor Support Configuration​

  • Defaults to 13 cores configurable between 13 and 25 with a step size of 4.
  • Defaults to 16935 KB of ram.
  • Supports changing CPU/RAM allocations on reboot.
  • Supports setting custom options before device boot.

RD-1AE with Hypervisor Support Storage​

  • It has 16 storage partitions:
    • sdcard
      • default size: 8.0 GB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called SD Card.
    • virtio_0
      • default size: 32.0 GB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called AP Disk (virtio).
    • boot_flash
      • default size: 64.0 MB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called Boot Flash.
    • ap_flash
      • default size: 64.0 MB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called AP Flash.
    • lcm_otp
      • default size: 64.0 KB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called LCM OTP.
    • arm_cmn_0
      • default size: 512.0 KB.
      • This partition is required in firmware .zip files.
    • arm_ni_710ae_10
      • default size: 380.0 KB.
      • This partition is required in firmware .zip files.
    • arm_ni_710ae_11
      • default size: 380.0 KB.
      • This partition is required in firmware .zip files.
    • arm_ni_710ae_12
      • default size: 380.0 KB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_0
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_1
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_2
      • default size: 3.81 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_3
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_4
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_5
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_6
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.

RD-1AE with Hypervisor Support I/O​

  • It supports ssh with username: user password: password.
  • Supports vMMIO.
  • It has 11 serial ports available via dropdown named:
    • gdb named Dynamic Kronos GDB port service of type gdb.
    • uart0-cons named RSS Secure of type console.
    • uart1-cons named RSS Non-Secure of type console.
    • uart2-cons named SCP of type console.
    • uart3-cons named Safety Island CL0 of type console.
    • uart4-cons named Safety Island CL1 of type console.
    • uart5-cons named Safety Island CL2 of type console.
    • uart6-cons named Primary Compute Secure of type console.
    • uart7-cons named Primary Compute Non-Secure of type console.
    • uart8-cons named Primary Compute RMN of type console.
    • uart9-cons named LCP of type console.

RD-1AE​

Board Image

  • RD-1AE is generally available.
  • Supports connecting with the GNU Project Debugger.

RD-1AE Configuration​

  • Defaults to 13 cores configurable between 13 and 25 with a step size of 4.
  • Defaults to 16935 KB of ram.
  • Supports changing CPU/RAM allocations on reboot.
  • Supports setting custom options before device boot.

RD-1AE Storage​

  • It has 17 storage partitions:
    • sdcard
      • default size: 8.0 GB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called SD Card.
    • virtio_0
      • default size: 32.0 GB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called AP Disk (virtio).
    • boot_flash
      • default size: 64.0 MB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called Boot Flash.
    • ap_flash
      • default size: 64.0 MB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called AP Flash.
    • lcm_otp
      • default size: 64.0 KB.
      • This partition is required in firmware .zip files.
      • This partition can be uploaded in advanced settings where it is called LCM OTP.
    • arm_cmn_0
      • default size: 512.0 KB.
      • This partition is required in firmware .zip files.
    • arm_ni_710ae_10
      • default size: 380.0 KB.
      • This partition is required in firmware .zip files.
    • arm_ni_710ae_11
      • default size: 380.0 KB.
      • This partition is required in firmware .zip files.
    • arm_ni_710ae_12
      • default size: 380.0 KB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_0
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_1
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_2
      • default size: 3.81 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_3
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_4
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_5
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • arm_ni_tower_6
      • default size: 4.0 MB.
      • This partition is required in firmware .zip files.
    • efiv
      • default size: 64.0 KB.
      • This partition is optional in firmware .zip files and will be filled with 0xff if not present.

RD-1AE I/O​

  • It supports ssh with username: user password: password.
  • Supports vMMIO.
  • It has 11 serial ports available via dropdown named:
    • gdb named Dynamic Kronos GDB port service of type gdb.
    • uart0-cons named RSS Secure of type console.
    • uart1-cons named RSS Non-Secure of type console.
    • uart2-cons named SCP of type console.
    • uart3-cons named Safety Island CL0 of type console.
    • uart4-cons named Safety Island CL1 of type console.
    • uart5-cons named Safety Island CL2 of type console.
    • uart6-cons named Primary Compute Secure of type console.
    • uart7-cons named Primary Compute Non-Secure of type console.
    • uart8-cons named Primary Compute RMN of type console.
    • uart9-cons named LCP of type console.